estimates

How to Create a Progress Invoice from an Estimate

The U.S. economy may be picking up, but your customers are probably still being very careful with expenditures. If your company’s finances will allow it, you can help them out on sizable jobs by using progress invoicing, also known as partial billing or progress billing.

You could, of course, simply create invoices for smaller chunks of the job as they come. A smarter way is to build estimates for the entire job or sequential phases so your customer can see the big picture. You can still use progress invoicing to start collecting funds one segment at a time.

How to Proceed

First, be sure you have progress invoicing turned on. Go to Edit | Preferences | Jobs & Estimates | Company Preferences and make sure the Yes button is filled in next to the questions about estimates and progress invoicing.

Now create your estimate (these instructions are for QuickBooks Premier 2013; your steps may vary slightly). Go to Customers | Create Estimates. When you’ve entered all of the items you want to include in this phase of your project, click the Create Invoice button. This window will open:


Figure 1: You can decide how many of your estimate items will be included on your progress invoice. 

By clicking one of these buttons, you can bill the customer 100 percent of what’s due on the invoice or just a percentage. But let’s say you and your customer have agreed that payment will be due in pre-defined stages, so click the third button and select one or more of the line items. Click OK. QuickBooks will display a new window that lets you select items and/or percentages of amounts due.

In our example here, we’re going to invoice the customer for two items, the blueprints and floor plans. So we selected the button next to Show Quantity and Rate and entered the full estimated quantity for each item in the QTY columns (if you chose Show Percentage, new columns would appear). It would look like this:


Figure 2: You can select specific items or percentages for your progress invoice. 

Click OK. QuickBooks will return to your progress invoice, which you can save and print or email to your customer. Your original estimate will remain unchanged.

Tip: If you don’t want any of the zero amounts to appear on the progress invoice, go toEdit | Preferences | Jobs & Estimates | Company Preferences and make sure there’s a check mark in the box next to Don’t print items that have zero amounts.

Following Up

When you want to bill for another set of items on this estimate, simply repeat these steps.

Here’s an easy way to determine how much (if any) of the estimate has been invoiced. Go to the Customer Center and select the customer. Click the arrow next to the Show field and select Estimates. Any estimate that has a zero in the OPEN BALANCE column has been completely billed.

QuickBooks provides a report that tells you where you are with all of your progress invoices. Go to Reports | Jobs, Time & Mileage | Job Progress Invoices vs. Estimates. Your report will include the progress invoice you just created:


Figure 3: You can see what percentage of each estimate has been included on a progress invoice in this report. 

More Options

What if you determine that you won’t have one or more of the items on the estimate? QuickBooks lets you quickly generate a purchase order. With your estimate open, clickCreate Purchase Order to select the item(s) needed and generate the form. You can also click Create Sales Order if one is necessary.

Estimates provide a useful way to fine-tune your bookkeeping and inform your customers about impending costs. They can also be confusing if you don’t keep up with them. We can help you determine when they’re a good idea and how to keep them organized. QuickBooks provides good tools here, but they do require some administrative control.

Spring Cleaning: Streamlining QuickBooks 2013

Although Intuit did a great job of giving QuickBooks’ home page a fresher, more “open” look in its 2013 versions, maybe some of your screens have become unnecessarily cluttered. Perhaps your QuickBooks company file needs some attention as well. By taking a few minutes to do some “spring cleaning” you’ll have a tidier workspace, and you’ll save time and frustration. The following suggestions will help you to do just that.

Make a Clean Start

One simple way to take care of cluttered screens is to do the following:

  • Minimize icons. That pretty graphical process map on the home page is great for quick access to frequently-used actions. Some of them must remain there if they’re related to activities you do (i.e., Invoices has to stay if you use Estimates), but you can remove some of the ones you don’t use. Go to Preferences | Desktop View | Company Preferences. You’ll see this:


Figure 1: You can turn off some of the feature icons on your home page.

Some of the options have been grayed out because they support other processes. To remove an active feature icon like Inventory, click on it. In the window that opens, uncheck the box next to Inventory and purchase orders are active (you can also modify options here).


Figure 2: Clicking the checkbox next to Inventory and purchase orders are activegrays out the other options and removed related feature icons from the home page.

To reduce the number of feature icons even more, go to the Finance Charge, Jobs & Estimates, Payroll & Employees, Sales & Customers, Sales Tax and Time & Expenses. QuickBooks removes the related icons and reroutes the process map on the home page.

More Time-Saving Tweaks

  • Don’t allow multiple windows to open in your work area. Tired of seeing all of those overlapping open windows on your desktop? Open the View menu and select One Window. All of your open windows remain active in the background. To return to one of them, open the Window menu and select the one you want to move to the front (Window | Close All returns you to a blank work area).


Figure 3: Your Icon bar can be your fastest route to often needed screens–if you modify it to only contain the functions you use, in order of importance. You can also change the labels to make them more meaningful to you.

    • Trim down your icon bar. Seems like a minimal change, but it’s one of those things that can add unnecessary moments of frustration throughout the day (“Where’s the Calendar!”). Click View | Customize Icon Bar.

 

  • Customize columns in Lists. You probably work in QuickBooks’ Lists often, but are you spending too much time tracking down the right information? Customize their columns so your registers contain only what you usually need (and add additional ones if it’s helpful). Open a list, right-click anywhere within it and select Customize Columns to modify the display (re-size column widths by placing your cursor on the vertical set of dots between labels and dragging).


Figure 4: When you customize your columns in Lists, you’ll find what you’re looking for faster. 

  • Hide inactive items. Highlight an item, right-click and select Make Item Inactive. Open the Item menu in the lower left and click Hide Inactive Items (this action won’t delete them).

Internal Cleaning

These may all seem like cosmetic changes, but you will save time and frustration over the long run.

The most critical spring cleaning task is company file analysis and maintenance. We can handle this for you. QuickBooks can slow down and start generating error messages when the data file becomes unwieldy and sloppy. Preventing file corruption before it crashes your system is a lot faster and less expensive than a reconstruction project.

Job-Tracking Adds Precision to Your QuickBooks Company

Does your business have clients whose work sometimes requires multiple steps drawn out over weeks or months, like remodeling projects or court cases? If so, and you’re not using QuickBooks’ Jobs features, you’re missing out on the opportunity to track and evaluate the financial impact of these complex tasks.

You can, of course, just send an invoice out to these customers. But if you do, you’re not taking advantage of what QuickBooks’ job tools can do. If you create and track these projects faithfully, you’ll have valuable insight that you wouldn’t otherwise.

Simple definitions

Before you create jobs, you’ll need to make sure that QuickBooks is set up properly. Click on Edit | Preferences and then on the Jobs & Estimates and Company Preferences tabs. You’ll see this window:

Figure 1: It’s important to set up Jobs options before you begin.

There are just a few preferences to set here, but you need to make any necessary changes before you launch into job creation. Also, if you track time, scroll down on the list on the left to Time & Expenses. Be sure time-tracking is turned on, as this will likely be an important element of your jobs.

Before you can attach jobs to customers, you’ll have to define your Job Types. Go to Lists | Customer & Vendor Profile Lists | Job Type List. A small window opens with command bars at the bottom. Open the Job Type tab and click New. Let’s say you’re a building contractor. You might type Remodel in the Job Type Name box, then OK.

Repeat until you’ve entered all of your job types. If you want to build subtypes, click New again and enter the name of the subtype, like Kitchen. Click Subtype of and click the arrow to drop down the list. Select the parent type and click OK.

Figure 2: It’s easy to build a list of your job types and subtypes.

Outlining your jobs

Of course, you’ll be attaching jobs to customers, though each Customer:Job will exist as an individual entity. So start by opening the Customer Center. Right-click on a customer who needs a job tracked and select Add Job. The New Job window opens, which should already contain your customer’s profile. Click on the Job Info tab. In the Job Name field, enter Main Home Kitchen Remodel, and skip over the Opening Balance field.

Click the arrow to open the Job Status list and select Awarded from the options offered (None, Pending, Awarded, In Progress, Closed, Not Awarded). Select the Start Date and Projected End Date. Type a brief description in the Description field and select the correct job type. Your window will look something like this:

Figure 3: You can lay out simple details about each job on this screen.

Click OK to save this job. It’s now available for use in transactions and reports. When you’re creating an invoice or estimate for a specific job, for example, or filtering a report, you’ll need to make sure that you select the correct job, and not just the customer. Otherwise, your bookkeeping will not be accurate.

Estimates and progress invoicing

If you do many jobs that take weeks or months, you may find yourself in a bit of a cash flow crunch. Rather than billing for everything at the end, companies in this position often deal with that by creating estimates and dispatching progress invoices. You don’t even have to send estimates to customers; they’re helpful, though, for gauging your projected income and expenses.

To build a progress invoice partway through a job, create the estimate and click Create Invoice. This window will open, offering three billing options:

Figure 4: QuickBooks gives you three options when you’re creating a progress invoice.

Select the one you want and click OK. Your invoice will appear, billed according to your instructions.

In-depth reports

Insightful, detailed reports are your reward for all of this meticulous bookkeeping. QuickBooks’ job definitions may be fairly simple, but the reports they make possible give you tremendous insight into how cost-effective your projects are. You’ll learn how each job is doing in terms of things like:

  • Profitability
  • The accuracy of your estimates
  • Time and mileage
  • Unbilled costs
  • Job status

QuickBooks’ job-tracking tools are not overly difficult to use, but you may want our help in getting your jobs set up and preparing progress invoices. Once you get more than a few jobs in the pipeline, you’re going to want to be very confident in your ability to keep up with these procedures. But if you do, you’ll have a deeper awareness of how all of your inventory and labor and other expenses are working together to complete projects profitably.

Scroll to top